Crane Rigger Safety Diploma Course In Rawalpindi,6th Road

A certified rigger is a person who has been trained and certified to handle and move loads. The level of certification depends upon the individual’s training, knowledge, skill base, and ability to perform functions related to the selection, inspection, and proper use of rigging equipment.

The Occupational Safety and Health Administration (OSHA) estimates that most of these types of accidents can be prevented if proper safety precautions at job sites are initiated. This poses a serious problem for exposed workers and their employer. The OSHA rigging standard establishes uniform requirements to ensure that the hazards associated with rigging in U.S. workplaces are evaluated, safety procedures implemented, and that the proper hazard information is transmitted to all affected workers.

This rigging training course is designed for personnel who rig loads for lifting by cranes and for their supervisors. Floor crane operators and others working with overhead cranes will benefit from this comprehensive and safety focused Rigging Fundamentals course.

Our instructor will be able answer your questions and cover important course material and concepts. In addition to a course workbook participants will also receive a 4” x 5” pocket handbook which highlights good and bad rigging practices, sling capacities and how to calculate unknown loads.

Course objectives

Identify safe rigging practices

Conduct pre-use inspections of slings of all types and rigging hardware

Understand basic rigging principles

Load weight determination

Turning Loads

Course outline

Rigging Equipment

Rigging Standards

Risk Management

The Basic Rigging Plan

Rigging Terminology

Good & Bad Rigging Practices

Slings & Inspections Criteria

Wire Rope Slings

Chain Slings

Nylon Web Slings

Metal Mesh Slings

Endless Slings

Eyebolts

Shackles

This course is designed for participants to gain the necessary skills to plan, prepare & complete basic rigging work as prescribed by the National Standard for Licensing Persons Performing High Risk Work. On completion of this course, participants will be able to undertake the movement of plant and equipment, steel erection, use

hoists (including mast climbing hoists), undertake the placement of pre-cast concrete, use safety nets and static lines, install perimeter safety screens, shutters and cantilevered crane-loading platforms.

This crane rigging safety training course teaches employees the safe way to handle crane rigging and all the hazards associated with using cranes while at work. Cranes are used at many workplaces, across all major industries, to lift and move materials. Crane operators are generally trained and often certified in safe crane operations and inspection. However, many accidents involving cranes are caused by failures of crane rigging and rigging hardware.

International College of Technical Education.

Head Office :

Office # 27, Second Floor, Maryam Shadi Hall Plaza

(Airies Plaza), Shamsabad, Murree Road,

Rawalpindi, Pakistan 46000.

Email :

Contact : , ,